489-P1-LO-A20-E is Multilin's 489 generator management relay. The unit has a 1A phase CT input
In, the control voltage is 20 to 60VDC or 20 to 48 VAC 48-62 Hz. The device has a largeLCD enhanced display and 4-20 mA analog input.
As part of the GE SR family of relays, the 489-P1-LO-A20-E offers cost-effective protection and control with advanced communications. The unit is designed to be paired with small to medium sized generators to provide protection and reduce troubleshooting time. The device is easy to use and provides analog input for vibration monitoring as well as a td for bearing thermal protection.
The 489-P1-LO-A20-E has a large, easy-to-read front panel with 40 words on the top edge of the Ki
Character display. The display allows the user to view set and actual value messages, as well as diagnostic and default messages.
The front panel is equipped with a numeric keypad, value up and down keys, a program port interface, and multiple status Pointers
Indicator light, as well as control and programming keys. The bottom edge of the front panel includes a pull-out handle that can be
Installation - a wire lead seal to prevent unauthorized removal.
489-P1-LO-A20-E is a 489 generator management relay for Mutilin. The unit has a 1A phase CT input with a control voltage of 20 to 60VDC or 20 to 48 VAC 48-62 Hz. The device has a large L-CD enhanced display and 4-20 mA analog input.
As part of the GE SR family of relays, the 489-P1-LO-A20-E offers cost-effective protection and control with advanced communications. The unit is designed to be paired with small to medium sized generators to provide protection and reduce troubleshooting time. The device is easy to use and provides analog input for vibration monitoring as well as rtd for bearing thermal protection.
The 489-P1-L0-A20-E has a large, easy-to-read front panel with 40 characters displayed on the top edge of the board. The display allows the user to view set and actual value messages, as well as diagnostic and default messages. The front panel is equipped with a numeric keypad, value up and down keys, a program port interface, multiple status indicators, and control and programming keys. The bottom edge of the front panel includes a pull-out handle that can be fitted with a wire lead seal to prevent unauthorized removal.
This single support integrates directly into most DCS and SCADA systems. Supports DNP 3.0, Modbus RTU, and Modbus TCP/IP. The ground of the machine meets C37.90 electromagnetic interference, SWC,RFI interference
Anti-interference ability.
