• 350025 Indicates when the key phase mark on the spindle passes the key phase probe
  • 350025 Indicates when the key phase mark on the spindle passes the key phase probe
  • 350025 Indicates when the key phase mark on the spindle passes the key phase probe
  • 350025 Indicates when the key phase mark on the spindle passes the key phase probe
  • 350025 Indicates when the key phase mark on the spindle passes the key phase probe
  • 350025 Indicates when the key phase mark on the spindle passes the key phase probe
  • 350025 Indicates when the key phase mark on the spindle passes the key phase probe
  • 350025 Indicates when the key phase mark on the spindle passes the key phase probe

350025 Indicates when the key phase mark on the spindle passes the key phase probe

350025 Indicates when the key phase mark on the spindle passes the key phase probe

The 3500/25 improved key phase module is a half-height, 2-channel module designed to provide key phase signals to the monitor module in the 3500 frame. This module receives an input signal from an eddy current sensor or an electromagnetic sensor and converts this signal into a digital key phase signal that indicates when the key phase mark on the rotating shaft passes through the key phase probe.
  • 350025 Indicates when the key phase mark on the spindle passes the key phase probe
  • 350025 Indicates when the key phase mark on the spindle passes the key phase probe
  • 350025 Indicates when the key phase mark on the spindle passes the key phase probe
  • 350025 Indicates when the key phase mark on the spindle passes the key phase probe
Desciption
The key phase module is a module used to measure the phase and speed of a rotating object. It is usually composed of sensors, 350025  signal conditioning circuits and interface circuits, which can convert the mechanical signal of the rotating object into an electrical signal, and output the corresponding phase and speed information.

The key phase module is commonly used in industrial automation, aerospace, automotive electronics and other fields, and can be used to monitor the status of rotating equipment, such as motors, generators, fans, pumps, etc. By measuring the phase and speed of the rotating object, abnormal conditions of the equipment can be found in time, such as bearing wear, shaft bending, imbalance, etc., so that maintenance and repair can be carried out in advance to avoid equipment failure and shutdown.

There are many kinds of bond phase module, including photoelectric bond phase,350025   magnetoelectric bond phase, capacitive bond phase and so on. Different types of key phase module have different characteristics and application scope, which need to be selected according to specific application requirements.

When using the key phase module, it is necessary to pay attention to its installation position and method to ensure the accuracy and reliability of the measurement. At the same time, it is also necessary to consider the anti-interference ability and environmental adaptability.